|
RAPIER LOOM MODELGA738-II SPECIFICATION
Nominal reed width 2000-2200mm
Speed : Max operating speed 320 pick/min,max insertion rate 600m/min
Weft yarn count range Cotton-5Ne-80Ne
Wool-8Nm-130Nm
Man-made fibers-1200dtex-75tex
Fabric weight: From 70 to 600g/sqm
Power: Main motor 3kw-6pole
Shedding: Lower positive mechanical dobby max.20 shafts, pitch 12 or mechanical jacquard.
Beat-up: Four-bar linkage with short connecting rod
Let-off: Mechanical positive and continuous warp let off, pick density from 4 to 73 picks/cm.
Take-up: Mechanical positive and continuous warp cloth take-up. pick density from 4-73 picks/cm，the max winding diameter Full rolling diameter is 500mm
Warp stop: Electrical warp stop device with 6 bars
Weft stop: Piezo-electronic weft monitor with high sensitivity
Weft selection: Electronic weft selection which is available in single or mixed or multicolor up to 6 colors.
Weft feed: The loom is possible to be equipped with different types of weft accumulators.
Selvedges: Leno selvedges are driven by the 1st and 2nd of heald frame
Electrical control: The most advance electrical control system, microprocessor units guarantees all the machine functions, supervising operation, collecting and storage and display of productivity data.
Lubrication: The whole needful lubricating point is concentrative lubricated by means of a manual pump.
|
|
|
返回[纺纱设备(纺机)]
查看“纺纱设备(纺机)”资讯
查看全部供应“纺纱设备(纺机)”信息
回到页首